Enabling Mono on a Bus/Main will affect upstream Meters
|
The information in this article applies to:
- SONAR 8.5
- SONAR 8
- SONAR 7
- SONAR 6
- SONAR 5
- SONAR 4
- SONAR 3
- SONAR Home Studio Version 4
If you make a bus or main out mono by toggling its Mono/Stereo switch, any "upstream" meters-that is, meters on any tracks or buses that are assigned to the mono bus/main out-from the bus/main out will also display as mono.
Note: this only affects the meter display, not any audio that is bounced or exported. |
Version:
1.10, Last Updated: 11/5/2009
|
